The velocity of a particle moving in the positive direction of the x axis varies as v = α√x, where α is a positive constant. Assuming that at the moment t = 0 the particle was located at the point x = 0, find: (a) the time dependence of the velocity and the acceleration of the particle; (b) the mean velocity of the particle averaged over the time that the particle takes to cover the first s metres of the path.
(a) v = α²t/2 and w = α²/2, a constant. (b) The time to cover s is t = 2√s/α, and the mean velocity over that time is α√s/2. With the numbers on screen: v = t, w = m/s², t = s and the mean velocity is m/s.
Problem statement
Problem 1.22. The velocity of a particle moving in the positive direction of the x axis varies as v = α√x, where α is a positive constant. Assuming that at the moment t = 0 the particle was located at the point x = 0, find: (a) the time dependence of the velocity and the acceleration of the particle; (b) the mean velocity of the particle averaged over the time that the particle takes to cover the first s metres of the path.
Interpretation. The particle moves in one direction along the x axis, starting at x = 0 at t = 0. The speed is v = α√x, so the speed depends on the position. "Mean velocity averaged over the time" means the total displacement s divided by the total time taken, which is the same as the time average of v.
We assume α = 1 m½/s, because the problem gives no number. The unit of α is m½/s, since v is in m/s and √x is in m½. It is a slider.
We assume s = 9 m, because the problem gives no number. It is a slider.
Symbols: x is the position, v the speed, w the acceleration, s the path length in part (b), t the time needed to cover it.
The big idea in plain words
The rule v = α√x looks odd, because the speed depends on where the particle is. But the square root works in your favour. When you write v as dx/dt, you can move the √x to the left and integrate, and you get x proportional to t². That is the position of a particle with constant acceleration starting from rest. So the motion is simpler than it looks. The mean velocity over the time is then the displacement divided by the time.
The solution in each frame
Only the ground frame is needed. The origin is fixed and the particle moves along one line, so there is no second frame in the problem.
The solution step by step
Step 1, the position. The speed is v = dx/dt = α√x. Separate the variables: dx/√x = α dt. Integrate from x = 0 at t = 0: 2√x = αt, so x = α²t²/4 = t².
Step 2, part (a), the velocity. Differentiate the position: v = dx/dt = α²t/2 = t. The velocity grows in step with time.
Step 3, part (a), the acceleration. Differentiate again: w = dv/dt = α²/2 = m/s². It is constant. You can also get it straight from v = α√x: w = (α/2√x)(dx/dt) = (α/2√x)(α√x) = α²/2, where the √x cancels.
Step 4, part (b), the time. The particle covers the first s metres when x = s, so α²t²/4 = s. This gives t = 2√s/α = s.
Step 5, part (b), the mean velocity. Average v over this time: (1/t)∫v dt = (1/t)(α²t²/4) = α²t/4. Put in t = 2√s/α: the mean velocity is α√s/2 = m/s. It equals s/t, as it must, and it is half the final speed α√s = m/s. It is reached exactly halfway in time, at t = s.
A separate calculation does not use the formulas. It solves dx/dt = α√x on the computer in 200000 small steps, with a tiny start of 10−12 m. It finds that the particle reaches x = s at t = s, against s from the formula. It then adds up v dt and divides by t, which gives a mean velocity of m/s against m/s. It also measures the slope of v against t between two moments, which gives w = m/s² against m/s². The largest relative difference is .
Five methods
1. Force method
No mass or force is given, so this method does not apply. The result w = α²/2 says a constant force would produce this motion.
2. Energy method
Energy does not help here, since no mass is given.
3. Graph method
The second graph shows v against t. It is a straight line through the origin, which means constant acceleration. The area under it up to time t is x. The mean velocity is the height of the rectangle with the same area and the same width t, so it is the middle of the line, at t/2. The graph shows this as the dashed cyan line meeting the curve at t/2.
4. Calculus method
Separate the variables in dx/dt = α√x, integrate to get x(t), then differentiate for v and w, and average v over time. These are steps 1 to 5.
5. Check method
Units: α is in m½/s, so α²/2 is in m/s², which is an acceleration. Limits: for s = 0 the time and the mean velocity are zero. The mean velocity equals half the final speed, which is the rule for constant acceleration from rest.
Fastest: the graph method. Most reliable: the calculus method with the numerical check.
What each slider changes
| Control | Changes the answer? | What it changes |
|---|---|---|
| Constant α | Yes | The acceleration, the speed at any time, the time to cover s, the mean velocity and every curve |
| Path length s | Yes | The finish line, the time to cover s, the mean velocity and the length of the picture. Not v(t) or w |
| Moment shown t | No | The particle, the arrows, the dots on the graphs and the live readings |
| Given-answer mode | Sets α | The page finds α for a chosen mean velocity and warns if α would be outside 0.5 to 1.5 |
| Play and time bar | No | Play runs the motion until x = s, holds 2 s halfway in time and 1.2 s at the end, then repeats. The bar sets the time |
Parameters
| Quantity | Symbol | Value used |
|---|---|---|
| Constant in v = α√x | α | m½/s |
| Path length | s | m |
| Acceleration | w = α²/2 | m/s² |
| Time to cover s | t = 2√s/α | s |
| Mean velocity | α√s/2 | m/s |
| Speed at x = s | α√s | m/s |
| Average over distance (not asked) | 2α√s/3 | m/s |
Exam traps
- Thinking the acceleration depends on position because the speed does. It does not: w = α²/2 is constant.
- Averaging v over distance instead of time. That gives 2α√s/3, which is larger than the answer asked for.
- Taking the mean velocity as the speed at x = s. The mean is half of it.
- Putting v = α√x into a constant-acceleration formula before finding the acceleration. First find x(t), then differentiate.
- Forgetting the unit of α. It is m½/s, not m/s.